hobbyboss 2017/05 kits

A-1B Trainer 81744

product description:
AMX is a ground attack aircraft used to perform battlefield interdiction missions and is also used to perform near-air support and reconnaissance missions. AMX was co-developed by Italy and Brazil and was produced until 1999 and was named A-1 in the Brazilian Air Force.
AMX is a high subsonic aircraft that can fly at low altitude with day and night combat


 

French Navy "Strasbourg" battleship

 

product description:
Strasbourg started in November 1934 , completed in December 1938 . After the defeat of France in the Second World War, the British fleet attacked the French fleet in order to prevent the French fleet from being used by the Axis. 1940 Nian 7 months Mir Bill Gdansk port in Algeria, Strasbourg No. escaped British naval attack, fled to Hong Kong arrived in Toulon, France. 1942 Nian 11 Yue 27 days, Strasbourg number to avoid being captured by the German occupying forces, and drowned in the harbor of Toulon.

Product number 86507
product name French naval " Strasbourg " battleship
Barcode 6939319265074
Product ratio 1: 350
product type Plastic Model Warship Kit
Model size Length: 623mm Beam: 91.9mm
Total number of parts 650+
The total number of plates 14 sprues, hull and decks
Chrome parts N / a
Resin parts N / a
Metal parts Anchor chain
Etching parts 6 pcs
Film parts N / a
Date of publication 2017-05
More description Hull made from multi-directional slide moulds.
– Deck wood pattern finely rendered
– Contains 1 Loire 130 plane
– Contains display stand and engraved name plate
– Photo-etched frets included

 


 

Germany BR57 armored locomotive

 

product description:
German armored trains began in a war, but in World War II was gradually become the main armed forces of the German transport. In 1935, Weimar Defense Army was renamed the German Defense Force, 1920 ~ 1945 German Imperial Railway to the German national railway, armored train to protect the military facilities and along the railway. BR57 armored train is in the 1910 Prussian period G10 motor vehicle series improved, has a significant feature 0-10-0 of the land group.

Product number 82922
product name Germany BR57 armored locomotive
Barcode 6939319229229
Product ratio 1:72
product type Plastic Model Armor Kit
Model size Length: 495mm Width: 50.7mm
Total number of parts 90+
The total number of plates 5 sprues, cab and frame
Chrome parts N / a
Resin parts N / a
Metal parts N / a
Etching parts N / a
Film parts N / a
Date of publication 2017-05
More description The kit consists of over 90 parts with 4 section
roadbeds
-Newly tooled parts in accurate detail


 

Weasel III M Tank Destroyer – Late Type

 

product description:
"The Weasel" 3M is the last self-anti-tank gun that was modified by World War II with 38 (t) tank chassis. The main weapon is still the 75mm PaK 40 anti-tank gun, which has changed significantly compared to the previous series of the weasel , Contours are more low, tilt armor and multifunctional combat room. The engine moves from the rear to the middle of the driver and combat room, and the artillery and crew are installed in the combat room without the top protection at the rear of the vehicle. Compared to the previous model, the fighting room reduced to the height of the chassis floor, reducing the occupant's exposure and the probability of being found. Unlike the front of the two hamster III tanks, combat room behind the closure, the crew can only be in the vehicle's engine. M-type open open combat room layout, can only carry 27 rounds of shells. Chassis course machine guns are canceled, self-defense weapons for the crew carrying the MG34 or MG42 machine gun.

Product number 80168
product name Weasel III M Tank Destroyer – Late Type
Barcode 6939319201683
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 148.2mm Width: 61mm
Total number of parts 500+
The total number of plates 10 sprues and lower hull
Chrome parts N / a
Resin parts N / a
Metal parts Gun barrel
Etching parts 1 piece
Film parts N / a
Date of publication 2017-04
More description The kit consists of over 500 parts
& gt; the kit w / refined detail
& gt; multi-slide moulded lower hull, turret
> individual tracks
& gt; photo etched parts included

 


 

Su-17UM3 "Assembler-G" Fighter BombeR

 

product description:
Sukhoi Su-17 "assembler" is a fighter-bomber developed on the Su-7 series. They served from the Cold War and had a very long service time.
The new aircraft has basically undergone a redesign. It is equipped with a new engine, electronic equipment and a new variable swept wing, the new "assembler" can use a shorter runway for landing, its flight performance has become better, with greater load As well as speed.
Su-17UM3 is Su-17M3 improved from the facelift trainer, using the same with the Su-17M3 electronic equipment, with the latter with considerable combat capability. The outlet model is Su-22UM3 equipped with R-29 engine and Su-22UM3K equipped with Al-21F-3 engine.

Product number 81759
product name Su-17UM3 " Assembler -G" fighter bomber
Barcode 6939319217592
Product ratio 1:48
product type Plastic Model Aircraft Kit
Model size Length: 396mm Wingspan: 285mm
Total number of parts 380+
The total number of plates 14 sprues and tires
Chrome parts N / a
Resin parts N / a
Metal parts N / a
Etching parts 1 piece
Film parts N / a
Date of publication 2017-05
More description The kit consists of over 380 parts
-Detailed fuselage & wing w / accurate design
-Detailed cockpit


 

A-4E "Eagle" attack aircraft

 

product description:
A-4 "Eagle" is Douglas designed jet attack aircraft, in order to replace the US Navy's A-1 "Raiders." Douglas is minimized in size, weight and complexity. The result is that the weight of the plane is only half the naval design requirements. Its wings are short and compact, and can be easily parked on an aircraft carrier without folding.
A-4E facelift of the new Pratt & Whitney J52-P-6A engine, thrust 8400 pounds (about 37 kN), an increase of two pylons, a total of five points, improved avionics Equipment, equipped with new "Taka" navigation, Doppler navigation radar, radar altimeter, bomb computer and AJB-3A low-altitude bombing system. There were a lot of A-4E later replaced the larger thrust J52-P-8 engine, the thrust also increased to 9,300 pounds (about 41 kN); A-4E produced a total of 499.

Product number 81764
product name A-4E "Eagle" attack aircraft
Barcode 6939319217646
Product ratio 1:48
product type Plastic Model Aircraft Kit
Model size Length: 274mm Wingspan: 174mm
Total number of parts 320+
The total number of plates 10 sprues
Chrome parts N / a
Resin parts N / a
Metal parts N / a
Etching parts N / a
Film parts N / a
Date of publication 2017-04
More description The kit consists of over 320 parts, includes clear parts
for canopy.
-Detailed fuselage & wing w / accurate design

WHAT WILL OD of the quarter KP?

1 / 12 scale Fulldetail Kit: Tyrrell P34 1977

Scheduled to be released in July 2017

2017.06.28 I uploaded a new image.

【About Tyrrell P34 1977】 Tyrrell P34
debuted in 1976 F1 Grand Prix fourth round Spain Grand Prix, which caused a big sensation in the world of F1 from the unprecedented package of four front wheels, J. Schechter and P. De Paille Two drivers gave a good record of 3 and 4th in the drivers 'ranking and 3rd place in the constructors' championship, and we have successfully proved the superiority of the aerodynamic and breaking performance obtained by using a small wheel.
The team owner, K. Tyrell, was the most noteworthy driver from Sweden who was taking the most attention while appointing DePauleu, which has been driving the development of P34 in the next 77 years, as a driver. Succeeded in acquiring Peterson, the team will further evolve P34 to watch the title acquisition, and will be in the season of the Grand Prix.
The 77-year-old chassis and engines were almost the same as the previous year type, but the biggest difference was the body cowl full covered to the engine, resulting in further improved aerodynamic performance, in addition to the engine and gearbox We set a spacer and extended the wheelbase. Thanks to these improvements, the speed of top speed has surpassed that of rival machines.
However, as the battle between tire manufacturers of Michelin and Goodyear became fierce, Goodyear used by the Tyrel team had no choice but to devote himself to the development of regular front wheel tires, and was developed exclusively for P34, We will stop the development of tires for the front wheels that have extracted the potential. The combination of the rear tire which continues to evolve and the front wheel tire as it was before it gradually lost its balance and was forced to struggle and the four front wheels which had been dominated until then were driven into a situation that was disadvantageous , The team will take various measures on the machine to deal with them. Parts that extend the tread are added to the front wheels where sufficient traction can not be obtained, and the tire protrudes greatly outside the front cowl. There are remarkable changes on the appearance such as addition of air duct against brake trouble which occurred frequently, and moving the oil cooler which was in the back to the front of the front cowl. You can imagine that these changes were due to drivers and races in the midst of the season and were repeating try-and-error, but in the latter half they settle to almost the same specifications. <A I = 5> Although driving with this 77-year-old P34, the two drivers showed a good fight but did not win but the department who has been devoted to the development of P34 from the previous year won the second place in Canada Grand Prix I showed you. Despite the improvement following the improvement in the 77th season, although it is a P34 of the 77 year type that can be said to be a disappointing machine that could not leave the record of about 76 years, the distinctive sophisticated styling at that time the group Together with the fact that boasted top speed, we continue to attract motor sports fans.
【Kit Outline】
■ Among the 77 year P34 which many updates were done, we modeled the second-half battle specification which became the front wide tread at 1/12 scale.

■ Multi-material kit using white metal, urethane resin, metal ground, etched parts, rubber tires, decals, various codes.

■ Wheels and engine funnels are made from aluminum ground products.

■ The nose / cowl is removable, so you can see the internal structure even after completion.

■ Maker logo printed rubber tire.

 

Scheduled to be released in July 2017
K599 K600 1 / 12scale Fulldetail Kit: Tyrrell P34 1977 ¥ 68000 (+ tax)
K599 reservation acceptance
K600 reservation open