HOBBYBOSS NEW KITS FOR 01/06/2018

Delta Force FAV
The proportional model:1:35

ART BOX

Product introduction:

Item No 82406
Item Name Delta Force FAV
Bar Code 6939319224064
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 109mm Width: 59.1mm
Total Plastic Parts 120+
Total Sprues 6 sprues , chassis and tires
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts 1 pice
Film Accessory n/a
Released Date 2018-05
More Features The kit consists of over 120 parts
– Detailed frame w/accurate design
– Rubber tires have very good details..
– Photo-etched parts for engine grill

FULL BOX

ASSEMBLY MINI BOOK Page 1

Marking

decals


Pz.Kpfw.VI Sd.Kfz.182 Tiger II (Henschel July-1945 Production)

The proportional model:1:35

ART BOX

In early October 1942, plans for production of the VK 45.03 were reviewed,Initially two designs were provided, one by Henschel and one by Porsche. Both used a turret design from Krupp; the main differences were in the hull design, transmission and suspension.

The Henschel version used a conventional hull design with sloped armor resembling the layout of the Panther tank. It had a rear mounted engine and used nine overlapping road wheels per side, mounted on transverse torsion bars, in a similar manner to the original Tiger. To simplify maintenance, however, the wheels were overlapping rather than interleaved as in the Tiger

Henschel won the contract, and all Tiger IIs were produced by the firm. Two turret designs were used in production vehicles. The initial design is sometimes misleadingly called the "Porsche turret" due to the belief that it was designed by Porsche for their prototype. In fact this turret was simply the initial Krupp design for both prototypes. This turret had a rounded front and steeply sloped sides, with a difficult-to-manufacture curved bulge on the turret's left side, to accommodate the commander's cupola. Fifty early turrets were mounted to Henschel's hull and used in action. The more common "production" turret, sometimes called the "Henschel" turret, was simplified with a flat face, no shot trap (created by the curved face of the initial-type turret), less-steeply sloped sides, and no bulge for the commander's cupola.

The track system used on the Tiger II chassis was a unique one, which used alternating "contact shoe" and "connector" links—the contact shoe link had a pair of transverse metal bars that contacted the ground, while the connector links had no contact with the ground.

The Tiger II was developed late in the war and made in relatively small numbers. Like all German tanks, it had a gasoline engine. However, this same engine powered the much lighter Panther and Tiger I tanks. The Tiger II was under-powered, like many other heavy tanks of World War II, and consumed a lot of fuel which was already in short supply.

 

 

Item No 84533
Item Name Pz.Kpfw.VI Sd.Kfz.182 Tiger II (Henschel July-1945 Production)
Bar Code 6939319245335
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 289.9mm Width: 107.3mm
Total Plastic Parts 580+
Total Sprues 25 sprues , turret , lower hull and upper hull
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts gun barrel
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2018-05
More Features The kit consists of over 580 parts
>the kit w/refined detail
>multi-slide moulded lower hull , turret
>individual tracks
>photo etched parts included

FULL BOX

ASSEMBLY MINI BOOK Page 1

Marking 1

Marking 2

decals


89901 German Sd.Kfz.171 Pzkpfw Ausf A Metal Gun Barrel

for Item 84506

FULL BOX

Product introduction

Item No     89901
Item Name     German Sd.Kfz.171 Pzkpfw Ausf A Metal Gun Barrel for Item 84506
Bar Code     6939319299017
Scale     1:35
Item Type     Model Accessories
Model Dimension     Length: mm   Width: mm   Height: mm
Released Date     2018-05
More Features

 

ASSEMBLY MINI BOOK Page 1


P-61C Black Widow

The proportional model:1:72

ART BOX

 

Product introduction

Since the Air Force of each country started paying their attention to the night bombing,the bombing became more effective than ever.To fight against the night bombing,a series of night fighter were put into use.The American started their night fighter program on 1940.The Army used the P-70 Havoc and Beaufighter to fight with the Japanese until the first 45 P-61 Black Widow were in active service in October,1943.

But both the P-61A and P-61B were felt to have a deficiency in top speed and operational service ceiling.To improve the performance,two new more powerful Pratt & Whitney R-2800C engines were applied.With this increase in power,the top speed and altitude were increased to 430 mph and 30,000 feet.

Another changes on the P-61C was the wide chord propellers and special "fighter brakes" which allow the P-61C to turn much tighter and avoid overshooting targets.

 

 

Item No 87263
Item Name P-61C Black Widow
Bar Code 6939319272638
Scale 1:72
Item Type Plastic Model Aircraft Kit
Model Dimension Length: 210mm Wingspan: 279mm
Total Plastic Parts 90+
Total Sprues 10 sprues
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2018-05
More Features The kit consists of over 90 parts , includes 2 clear parts

FULL BOX 

ASSEMBLY MINI BOOK Page 1

Marking

decals


 

NEW KITS FROM trumpeter-china 01/06/2018

US M1A2 SEP Main Battle Tank

Model: 00927
Model ratio: 1:16

ART BOX

product description:

The M1A2 is the newest member of the M1 family and is a modified version of the post-Persian Gulf War. The main improvement was its own internal electronics and fire control system, which made it more perfect. In addition to the 62 new M1A2s, 1,079 older M1s were upgraded to M1A2.

Product number 00927
product name US M1A2 SEP Main Battle Tank
Bar code 9580208009278
Product ratio 1:16
product type Plastic Model Armor Kit
Model size Length: 620mm Width: 232mm
Total number of parts 1000+
Metal parts Screw
Etching components 1 piece
Film film n/a
Resin parts n/a
Total number of offsets 22 sprues , upper hull , lower hull and turret
Announcement date 2018-05
More description The kit consists of over 1000 parts
>the kit w/refined detail
>multi-slide moulded lower hull and upper hull
>individual tracks links
>Photo-eteched parts included

FULL BOX

ASSEMBLY MINI BOOK Page 1

Marking 1

Marking 2

decals


German Ju-87D-5 Dive Bomber 02424

Model ratio: 1:24

ART BOX

product description:

The Ju 87 "Stuka" dive bomber was perhaps one of the most famous dive bombers during World War II. From the beginning of the blitzkrieg, it served as an air force support force for the German Air Force.

The Ju 87D is the most important series in the Stuka family, and the Ju 87D-5 is the last dive-bombing Stukka. It extends the wing, adding an extra piece of armor to the lower part of the fuselage and the wing The weapon was replaced with two MG 151 20mm cannons. The Ju 87D-5 entered the war for the first time in the Battle of Kursk in 1943.

Product number 02424
product name German Ju-87D-5 Dive Bomber
Bar code 9580208024240
Product ratio 1:24
product type Plastic Model Aircraft Kit
Model size Length: 540.6mm Wingspan: 708.2mm
Total number of parts 390+
Metal parts n/a
Etching components 1 piece
Film film n/a
Resin parts n/a
Total number of offsets 18 sprues and tires
Announcement date 2018-05
More description – Detailed fuselage&wing w/accurate design
– Highly detailed engines
– Finely detailed cockpit,gear cabin,
– Grooved rubber tires
– PE parts included

FULL BOX

ASSEMBLY MINI BOOK Page 1

Marking 1

Marking 2

decals


The German Navy "Peter Strasse" aircraft carrier 06710

Model ratio: 1:700

ART BOX

product description:

The No. 2 ship of the Zeppelin class aircraft carrier used the name of Peter Strasser, chief of the German Airship of the First World War. The plan was built by the German plant in Kiel and started in 1938. Due to the dispute between the German navy and the air force over the ownership of the aircraft, the construction plan was continuously postponed, and the subsequent outbreak of World War II made the aircraft carrierMarch 26, 1940The cancellation of the construction and the disintegration were mainly due to Hitler's decision to use most of the Navy’s funds for the development of submarines, and the two aircraft carriers at this level were eventually unable to complete the work.

Product number 06710
product name German Navy "Peter Strasse" Aircraft Carrier
Bar code 9580208067100
Product ratio 1:700
product type Plastic Model Warship Kit
Model size Length: 375mm Beam: 45mm
Total number of parts 380+
Metal parts n/a
Etching components 1 piece
Film film n/a
Resin parts n/a
Total number of offsets 17 sprues and deck
Announcement date 2018-05
More description -hull split into two parts -Contains
display stand and engraved name plate
-Photo-Etched parts included
-Aircraft Wing includes:
Ar-195, Bf-109, Fi-167, Ju-87

FULL BOX

ASSEMBLY MINI BOOK Page 1

Marking

decals


2S19-M2 Self-propelled Howitzer 09534

Model ratio: 1:35

ART BOX

product description:

The 2S19M2 "Mstar-S" was first publicly presented at the 2013 International Weapons Exhibition held in Nizhny Tagil. The artillery unit of the Russian military area in the southern military area has begun to equip. So far it has participated in the Red Square military parade twice.

      Developed from 2S19, many modernization improvements have been made. Increased the automatic fire control system to increase the artillery firing rate; added a digital map to quickly recognize the terrain and perform combat tasks more quickly and efficiently under complex geography conditions; camouflage system is used to reduce vehicle thermal signal . It is able to carry out anti-gunfire maneuvers, autonomously determine the current coordinates, and can guarantee the implementation of "a one-time fire attack", using a gun to fire several missiles at the same time to destroy a target. The total weight of the artillery system is 43.24 tons, and the main weaponry and equipment is a 47-times-caliber 152-mm howitzer with a maximum range of 29 kilometers. The "red-land" artillery missile has a range of up to 20 kilometers, 50 ammunition bases and 10 rounds of fire. Points, 5 crew members. With a 780-horsepower engine, the maximum speed is 60 km/h and the journey is more than 600 km.

Product number     09534
product name     2S19-M2 Self-propelled Howitzer
Bar code     9580208095349
Product ratio     1:35
product type     Plastic Model Armor Kit
Model size     Length: 339.3mm Width: 103mm
Total number of parts     1000+
Metal parts     Copper cable
Etching components     2 pcs
Film film     n/a
Resin parts     n/a
Total number of offsets     21 sprues , lower hull , upper hull and turret
Announcement date     2018-05
More description     The kit consists of over 1000 parts
>the kit w/refined detail
>multi-slide moulded turret and lower hull
>photo etched parts included

FULL BOX

ASSEMBLY MINI BOOK Page 1

Marking

decals


German E-100 Heavy Tank – Krupp Turret 09543

Model ratio: 1:35

ART BOX

product description

The development of the E-100 began in June 1943 and was developed by Adolah. In 1944, the factory produced only the body part of the prototype, and the turret was not completed. In 1945, the body of this prototype fell into the hands of the Allies, and was transferred to Britain in June 1945 .

Product number 09543
product name German E-100 Heavy Tank – Krupp Turret
Bar code 9580208095431
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 311.8mm Width: 127.7mm
Total number of parts 250+
Metal parts n/a
Etching components 1 piece
Film film n/a
Resin parts n/a
Total number of offsets 6 sprues , upper hull , lower hull , turret and tracks
Announcement date 2018-05
More description The kit consists of over 250 parts
>the kit w/refined detail
>multi-slide moulded lower hull ,upper hull and turret
>
rubute tracks >photo etched parts included

FULL BOX

Marking

ASSEMBLY MINI BOOK Page 1

 

decals


Russian T-80BV main battle tank 07145

Model ratio: 1:72

ART BOX

product description:

T-80 is a main battle tank designed and manufactured by the former Soviet Union. It is a development model of the T-64. It was first introduced in 1976. It is the world's first main battle tank that is powered by gas turbines. The final model T-80U was produced at the Omsk plant in Russia. Now T-80UD and Ukrainian further improved T-84 production. The T-80 and its variants are still serving in the military in countries such as Russia, Belarus, Cyprus, Kazakhstan, Pakistan, South Korea and Ukraine.

      Compared with the earlier T-80, the T-80B has a new turret that uses composite armor and has improved its fire control system. The 9M112-1 Cobra can be used to fire anti-tank missiles. In 1980, it began to use a 1,100-horsepower engine. In 1982, it began to replace the new type of artillery. The T-80BV, which appeared since 1985, was equipped with explosive reaction armor. This additional reaction armor can increase the protection capability of 400 mm when dealing with chemical energy warheads.

Product number     07145
product name     Russian T-80BV main battle tank
Bar code     9580208071459
Product ratio     1:72
product type     Plastic Model Armor Kit
Model size     Length: 136mm Width: 52.2mm
Total number of parts     50+
Metal parts     N/A
Etching components     N/A
Film film     N/A
Resin parts     N/A
Total number of offsets     2 sprues , lower hull , upper hull , turret and track
Announcement date     2018-05
More description     The kit consists of over 50 parts

 

FULL BOX

ASSEMBLY MINI BOOK Page 1

decals


 

TRUMPETER 2018-07 New Products Notice

Russian MiG-29C "Fighting Point" fighter

Proportions: 1/32 Number: 03224


M983 Trailer & AN/TPY-2 X Band Radar

Proportions: 1/35 Number: 01059


T-72A Mod 1983 Main Battle Tank

Proportions: 1/35 Number: 09547


Russian Zil-131 military truck

Proportions: 1/35 Number: 01031


British Royal Navy Battleship Rodney

Ratio: 1/700 Number: 06718


E-75 plan tank

Ratio: 1/72 Number: 07125


Germany Ar 195

Ratio: 1/700 Number: 03463


Germany Bf109

Ratio: 1/700 Number: 03464


Germany Fi-167

Ratio: 1/700 Number: 03465


Germany Ju-87

Ratio: 1/700 Number: 03466

 


 

Did you pay for automobile tax?

Yesterday, May 31 was the automobile tax payment date of this fiscal year.
Everyone, have you got tax payment safely? What?
No, !no I guess it is almost like that which ended like that, but around me, including me, this automobile tax is heavy and there are a lot of people struggling and it is hard to work ASEASE
especially this year There was a lot of ever-earned charge amount Goessorifor salary
for two months … It's all this year I need it. I feel like I 'm saying I 'm getting lost easily by car selling !  !… I will reduce next year!
Well, let me see the new product relationship that had been finished before last week,note

First, here
The ☆ model car Nanba78
1/24 Mitsubishi A133A
Galant Λ (lambda) '78

BOX ART

First of all, package

 

Decal

Prototype finished product

Tail

It is like this.
This lambda was also exhibited at the hobby show the other day, but there were two unexpected reactions.
First is how to read names. There was a young person who did not know how to read "Λ". That's right. It's been over for more than 30 years since lambda is gone. You have to take some measures for hardships.
The second unexpected thing is that the reputation of the shape, the appearance was surprisingly good. Well this is probably a part of flattering, but I got more than one opinion like "I saw it after a long time but it was quite good". Although this lambda is produced by former Imai Chemie taking over the mold by our company, the old im smoking product has many such glowing glittering masterpieces.
Of course, the directionality is completely different from the latest kit, but Showa's plastic model also has a taste and it is interesting.

 

 

 

 

 

So, next ~

 
The ☆ model car No. 79
1/24 Suzuki ST 30

Carrie panel van '79

BOX ART 

 

First of all, package

 

Decal

Prototype finished product

 

Tail

It is like this.

The topic of this time has become a selectable kit of panel vans and postal cars.
… What is wrong with the postage notation in the package isTaller
this a mistake? It may be changed in the next lot … the
decal became new, it became the specification which matched the catalog of those daysAwesome
Yes Next

 

The ☆ model car No. 80
1/24 Mazda BD Familia XG '80

ART BOX

 

First of all, package

 

Decal

 

Prototype finished product

 

Tail

It is like this.
Red Familia. It is a place I want to commercialize at that time full aero car of the specification at that time, but I will quit because it probably will not sell.
We changed the specification so that we can assemble using the original front wheel both before and after this time. Although it is only a little, it is Rungnunreleased from the mysterious specification that the rear tire unavoidable in the FF car is thick because of this, there is still room for detail up, so everyone of modelers enjoy hand in putting a hand around them I think that I can.
An impossible kit that is beautifully finished with Tsurushi is also nice, but the old-fashioned kit which completes as it can be mistaken by inserting a hand is also fun.
We are going to recommend Okaimo to all members of the Mazda PartyThunder

So this week this is the end.

See you next Friday. Par

1/24 Bell kit new product, planned to be released in September 2018!

1/24 Bell Kit No. 8 Opel Manta 400 GR. B Guy Frequelin Tour de Corse 1984

brand SKYNET

Opel who challenged Group B

Rally car that was introduced to Ascona in 1983 when it became the first year of Group B at WRC (World Rally Championship). Two kinds of Gi · Flecran car who participated in Tool de Corse in 1984 and McRae car who participated in 24 Uren van Ieper held in Belgium will appear.

  • Completely new mold
  • A powerful body unique to group B
  • Reproduction inside the room where the roll cage is stretched
  • Complete reproducibility of suspension including suspension
  • Etched parts that enhance the completeness of the kit – Metallic parts – Metal inlet – Cloth seat belts are also included
  • Decal silk screen printing

* The image that is published is a prototype.


1/24 Bell Kit No. 9 Opel Manta 400 GR. B Jimmy McRae 24 Uren van Ieper

brand SKYNET

Opel who challenged Group B

Rally car that was introduced to Ascona in 1983 when it became the first year of Group B at WRC (World Rally Championship). Two kinds of Gi · Flecran car who participated in Tool de Corse in 1984 and McRae car who participated in 24 Uren van Ieper held in Belgium will appear.

  • Completely new mold
  • A powerful body unique to group B
  • Reproduction inside the room where the roll cage is stretched
  • Complete reproducibility of suspension including suspension
  • Etched parts that enhance the completeness of the kit – Metallic parts – Metal inlet – Cloth seat belts are also included
  • Decal silk screen printing

* The image that is published is a prototype.


 

hasegawa August 2018 New product information

Benetton B 190 B (1991 color)

Scale … 1:24
Part number ……… 20356 Our shipping … 2018 August 02 sale day …… 2018 08/05 around the main body price … 2800 yen (+ consumption tax) parts number … 75 full length model … 178 mm model full width … 87 mm

Pirelli tire plus OZ wheel, reproduced the 1991 B190B specification.
It is based on yellow + blue.
The parts color of the kit is Body: White, Suspension: Black.
Decal (marking)

  • 1991 F1 World Championship First Round American Grand Prix participation car
    third place: Car No. 20 Driver: Nelson Piquet
  • Car No.19 Driver: Roberto Moreno

Pleasure racing Mazda 767 B

Scale … 1:24
product number ……… 20359 Our shipping … 2018 August 02 sale day …… 2018 08-05 Body price … 3000 yen (+ consumption tax) parts number … 80 model full length … 192 mm model full width … 83 mm

Automobile sales dealer Shizuoka Mazda Co., Ltd.'s parent company, private team,
pleasure racing machine is reproduced.
On the front part of the car body, NWB, Zahren, the Trident's logo was written large,
coloring based on pink & yellow is attractive.
Please also pay attention to the sponsor mark of "Hasegawa" ♪
Decal (marking)

  • 1992 All Japan Sports Prototype Car endurance championship
    entry car pleasure racing team Car No. 230

Maritime Self Defense Force Escort Ship "HYPER DETAIL"
Scale … 1: 700
product number ……… 30054 Our shipping … 2018 August 04 Release date …… 2018 08-08 Body price … 4400 yen (+ consumption tax) Number of parts … 159 Model full length … 230mm Model full width … 30 mm

Etched parts

  • Main mast
  • Phased Array Radar
  • handrail
  • Louvers on the outer wall
  • Watertight door parts etc.

Product Specifications

  • Missile escort ship "176" (2016)

Tamago Girls Collection No.03 "Amy McDonnell" w / P-40 Warhawk

Scale … 1:20
product number ……… SP382 Our shipping … 2018 August 07 sale day …… 2018 08/10 days Main unit price … 2800 yen (+ consumption tax)

Set 1/20 scale figure (made of resin) of "Tamago Girls Amy McDonnell" and eggs of the original marking!
Mr. Satoshi Tsujimura, figure illustration is Takashi Fujisawa's package illustration ♪
Decal (marking)

  • Eye for figure etc
  • For P-40: Original marking decal

Tamago Girls Collection No.04 "White Calm Mikumo" w / Zero Battle

Scale … 1:20
product number ……… SP383 Our company shipping … 2018 August 07 sale day …… 2018 08 10 around the main body price … 2800 yen (+ consumption tax)

A new
1/20 scale figure (made of resin) of "Shiranagi (Mirror of Shiranagi)" joined to "Tamago Girls" and set eggs of original marking set!
The prototype of figure is Mr. Satoshi Tsujimura, package illustration Takashi Fujisawa will be in charge ♪
Decal (marking)

  • Eyes for figures, patterns of yukata etc
  • For zero fighting: original marking decal

F-35 Lightning II (Type A) "Air Self Defense Force Temporary F-35 Squadron"
Scale … 1:72
Part number ……… 02284 Our shipping … 2018 August 17 sale day … …. 2018 0 Aug 22nd Body price … 3000 yen (+ consumption tax) parts number … 68 total model length … 217mm model full width … 148 mm

The first F – 35A, AX – 6 deployed at Misawa base (
Unit 6 for F – 35A Air Self Defense Force : Domestic production No.2) will be reproduced.
Temporary F – 35 Squadron is a unit organized on the assumption that it will be reorganized into the 302nd Squadron.
On February 24th the F – 35A deployment commemoration ceremony was held and this machine was exhibited.
Decal (marking)

  • Air Self Defense Force Temporary F – 35 A Squadron affiliation machine "AX – 6: 706" (Misawa base: February 24, 2018)
  • other

Volkswagen Beetle "Moon Equipped"
Scale … 1:24
Part number ……… 20357 Our shipping … 2018 August 17 sale day … …. 2018 08-22 Body price… 3800 yen (+ consumption tax) parts number … 82 Model full length … 171 mm Model full width… 64 mm

Coordinated with yellow & black,
MOON Equipped color Beetle appeared!
It is designed with the eyeball mark drawn largely in the center of the hood.
Wheel cap fitted with a moon disk.
Part color of the body will be yellow.

 

Metal parts
· Wheel cap parts
Decal (marking)

  • Moon Equipped specification (assumed marking)

Mitsubishi A6M8 zero type ship fighter 54/64 type
Scale … 1:48
Part number ……… 09821 Our shipping … 2018 August 21 sale day … …. 2018 08-24 Body price… 2400 yen (+ consumption tax) Number of parts… 143 Model total length … 192 mm Model full width … 229 mm

It
is a fuselage whose engine has been replaced with Venus Sixth Type in order to regenerate the Zero Fighter 52 Crown Type, which has increased in weight due to repeated renovations and has deteriorated performance .
The shape of the cowling has changed considerably, and the spinner is also equipped with a large one.
For Type IV,
it was possible to equip a falling-type augmentation tank containing 150 liters on the bottom of the main wing one by one to equip a 500 kg bomb .
Decal (marking)

  • Zero type ship fighter aircraft type 54 prototype No.2 "Ko-A6-82"
  • Zero type ship fighter aircraft type 64 Yokosuka aircraft group belonging machine "Yo -257"

"Subscribe!" Subaru 360 Deluxe
Scale … 1:24
Part number ……… SP381 Our company shipping … 2018 August 21 sale day … …. 2018 August 24 around the main body price … 3500 yen (+ consumption tax)

Plastic model × illustration spreading diorama world "Raito and Bokusu" series appeared!
The first one is a popular comic distribution site "comic Newtype" in the serial series "Welcome to!",
Mr. Echigoh 's illustration is reproduced on 1/24 scale! Acrylic stand figures of Momose Riko (Momose Riko (right)) and Kogure Yuzu (Kokoro Yuzu (left))
who learn the restoration of endangered cars at the four-wheel girls' college abduction department and "Subaru 360 Deluxe "Plastic model, a set of scenery sheets, diorama the illustration world!

"Welcome to!" Is currently on sale at Comic Newtype! Try reading ↓!
https://comic.webnewtype.com/contents/zetsu/
Product inside 
color printed matter : scenery sheet (cardboard folded)
· acrylic stand figure : 2 persons (1 piece)
by Momose Riko and Kogure Yuzu · Plastic model : Subaru 360 Deluxe
Decal (marking)

  • Subaru 360 Original marking for Deluxe

Space Wolf SW-190 "Herlock Custom"
Scale … 1:72
product number ……… 64701 Our company shipping … 2018 August 21 sale day … …. 2018 August 24 around the body price … 2600 yen (+ consumption tax) parts number … 87 full length model … 164 mm model full width … 157.5 mm

From the SW – 190 onboard Arcadia 's warfare machine, kit the dedicated harlock machine.
This machine is Space Wolf which Oyama Totiro specially customized, it is an aircraft manufactured only a few machines.
The gun pod type dimension recoil cannon is installed under the main wing!
The intake of the left side of the nose is enlarged, etc. It is
a special equipment equipped with increased thermal power and output.
Decal (marking)

  • Herlock exclusive machine
  • Oyama Tachiro exclusive machine
  • Dimensional recoil gun tester (fire pattern)

VF – 0 B (variable blade multiple seat type) "Macross zero"
Scale … 1:72
Item No. ……… 65770 Our company shipping … 2018 August 21 sale day … …. 2018 08-24 Body price … 2800 yen (+ consumption tax) parts number … 119 model total length … 271 mm model full width … 286 mm
*************************************************************************************
Boeing 787-8 "Demonstrators 1st Unit"
Scale … 1: 200
product number ……… 10807 Our shipping … 2018 August 23 sale day … …. 2018 08-26 Body price … 3000 yen (+ consumption tax) parts number … 64 full model length … 284 mm model full width … 301 mm

At the debut of B 787,
Unit 1 was reproduced from the demonstration striker of Boeing Company who conducted a test flight and showcase .
The aircraft is
scheduled to be exhibited indoors indoor at the Centrair (Chubu International Airport) compound commercial facility "FLIGHT OF DREAMS" which is scheduled to open this summer !
Decal (marking)

  • Unit 1 "N787BA"
*************************************************************************************
F-8E Crusader
Scale … 1:48
Part number ……… PT25 Our company shipping… 2018 August 23 sale day … …. 2018 08-26 Body price … 3200 yen (+ consumption tax) parts number … 119 Model total length … 348mm Model full width … 226 mm

Decal (marking)

  • US Navy 191 Battle Squadron CVW-19 Commander Billy Phillips Colonel Reserve Machine October 1966
  • The 194th Combat Squadron of the US Navy CVW-19 Commander B. Philips Nakasato November 1966

ANA Airbus A 321ceo

Scale … 1: 200
product number ……… 10827 Our shipping … 2018 August 23 sale day … …. 2018 08-26 Body price … 2200 yen (+ consumption tax) parts number … 64 full model length … 222.5 mm Model full width … 177 mm

A 321 ceo (Current Engine Option) is
a type equipped with a conventional engine while wearing a sharklet at the wing tip .
In order to accurately reproduce the details of the details
, set the extension of the rear end of the engine nozzle and the fin of the engine nacelle with a new mold.
Additional Plastic Parts

  • Extension of the rear end of the fin / engine nozzle of the engine nacelle

Decal (marking)

  • All Nippon Airways Unit 2 "JA 112 A"
  • All Nippon Airways Unit 1 "JA111A" (Operation commenced on November 12, 2016)

BMW 2002 ti

Scale … 1:24
Part number ……… 20354 Our company shipping … 2018 August 28 sale day … …. 2018 08 31 days around the main body price … 3200 yen (+ consumption tax) parts number … 130 full length model … 177.5 mm model full width … 68 mm

We will make the twin carburetor model BMW 2002 ti as a kit with commercial car specifications.
The interior reproduces the late model. Set up a headrest part with a slight indentation at the top with new parts.
Part color of the body is silver. Wheel cap is plated parts.

 

Dedicated plastic parts

· Dashboard · Steel Wheel · Wheel Cap
· Front Bumper Overrider Parts
Additional Plastic Parts

  • Head rest component

Isuzu Gemini (JT 190) ZZ Handling by Lotus

Scale … 1:24
Part number ……… 20355 Our shipping … 2018 08/28 sale day …… 2018 08 31 days around the main body price … 3200 yen (+ consumption tax) parts number … 108 full length model … 169.5 mm model full width … 75.5 mm

"To maximize the European taste of running."
Upon receiving technical consulting from Lotus, UK
, specialized cars manufactured by Isuzu's high-performance DOHC and Lotus Tuning Suspension,
handling by lotus (pre-midterm specification) will be made into a kit.
Part color of the body is dark green!
Front & rear bumpers etc. We reproduce our own design accurately.
Furthermore, BBS aluminum wheel of optional setting is made into parts.
A separate coloring seal is attached for painting windshield of windshield.
Additional Plastic Parts

  • Front bumper
  • Rear bumper
  • Tail light
  • Muffler (2 muffler cutters out)
  • Wheel parts

UH-60J "Maritime Self-Defense Force 72nd Air Corps"
Scale … 1:72
Part number ……… 02283 Our shipping … 2018 August 30 sale day …… 2018 09 02 days around the main body price … 3500 yen (+ consumption tax) parts number … 109 total model length … 256.5 mm model full width … 228 mm

From the machine belonging to the Maritime Self-Defense Force 72th Air Corps "SKY LARK (Hibari)" commissioned for transportation rescue, I
will kit the UH-60J (RESCUE LARK) wrapped in white & red orange two-tone color.
"65" is a special painting machine featuring the spring-like marking depicting "Sakura's petal",
the unit mark of the 72nd Air Corps and
the mascot character "Omura chan" of Omura City are drawn at the rear of the fuselage I will.
Additional Plastic Parts

  • Radome · sensor · antenna · bubble side window part

Etched parts

  • Antenna parts

Decal (marking)

  • Omura Air Base Base Opening Corps 58th Anniversary Coating Machine "65" (Omura Air Base: May 24, 2015)
  • Tokushima Air Aviation Remote Tank Tokushima Air Base Base Opening Corps 55th Anniversary Coating Machine "72"
    (Tokushima Air Base: September 28, 2013)

Skyscraper P1Y1 Land Bomber Galaxy 11 Type "765 Air Corps Multi Gun Equipment"
Scale … 1:72
Part number ……… 02285 Our shipping … 2018 August 30 sale day …… 2018 09/02 Near the main body price … 3500 yen (+ consumption tax) parts number … 86 Model full length … 220.5 mm Model full width … 278 mm

We will kit a special specification machine equipped with 10 20 mm diagonal guns, 5 rows × 2 rows on the bottom of the fuselage.
This machine is a US aircraft airfield near Lingaen Bay in the Philippines and an aircraft injected for the ship's attack and is
commercialized based on the description of "Attack Fourth Aircraft Combat Battle Detail Report."
An oblique gun is a precise expression with brass grind!
Etched parts

  • H-6 radar parts

Ground material

  • 20mm diagonal gun (× 10 pieces) parts

Decal (marking)

  • 765 Navy Air Corps Attack No. 401 Squadron affiliation machine "765-78" (March 1945), "765-87" (March 1945)

 

NEW KIT IN PROGRESS-1/35 SOVIET 1,5 t. TRUCK w/ M-4 Maxim AA Machine Gun 35186

Description

Scale: 1:35

Barcode: 4820183311627

Series: WW II Military Miniatures

Box size: 345x240x70 mm

HIGHLY DETAILED MODEL
2 VARIANTS PLATFORME BOARDS
DOORS, CAR HOOD, PLATFORME BOARDS CAN BE POSED OPEN OR CLOSED
ACCURATE ENGINE
CLEAR PARTS INCLUDED
PHOTO-ETCHED PARTS INCLUDED
DECAL SHEET FOR 10 VARIANTS
HIGHLY DETAILED M-4 MAXIM AA MACHINE GUN INCLUDED
2 FIGURES ARE INCLUDED


Content box

 


3D renders


Side views