EF66 ON THE WAY

Although the release is gradually approaching EF 66, samples of wheels of aluminum made simultaneously are delivered.

Although there are still fixes, I will introduce the introduction of the kit as well.

 

This is an aluminum wheel (sold separately) which will be released at the same time

Although it is a parting spot which is also the point of view of EF 66 this time, I explained it before, but it is close to 100 parts with one truck, and the detail is pretty sticking considerably.

 

Originally it is a plastic resin wheel, but here we will manufacture it with aluminum wheels, sold separately.

 

First of all, it is a wheel unit.

In this kit, we have reproduced the wheel under the wheel which will become invisible once it gets set up. As shown in the picture below, the cover is attached so it will be completely hidden.

And it is the frame of the dolly (both ends).

There is also particular attention here, and after springing up it is almost impossible to see the spring inside springs also reproduced with metal springs.

↓ It is the back side.

↓ I can see it is real?

And here is the completed one

Although the brake may be movable, it may be incomprehensible, but the sandbox is also reproduced in a real way.

After completion we have plenty of weight!

 

Today is the end for now.

I will introduce you in the future at a later date.

 

See you next week.


[Reservation special price November shipping schedule] Electric locomotive EF 66 latter type 1/45 train museum OJ No 4 # Plastic model

Description of item

A yearning electric locomotive "EF 66" appeared dignified! !

The high power electric locomotive "EF 66" representing Showa will be released in the train museum series at last. About 2 years in development period, over 3,000 pieces of interview pictures were taken to reproduce the brave appearance of EF 66 in detail. Especially the reproduction of the dolly and pantograph is confident. It is a late model called secondary car to sell. Please enjoy this locomotive with different charm from DD51 on sale while assembling.

  • Total length of about 400 mm, total height of about 120 mm (including pantograph)
  • About 1,000 parts for all parts
  • Etching, metal seal included
  • PS22 type pantograph attached
  • The attached display stand reversibly reproduces two kinds of flat trackbed and maintenance pit

להשאיר תגובה

היכנס באמצעות אחת השיטות האלה כדי לפרסם את התגובה שלך:

הלוגו של WordPress.com

אתה מגיב באמצעות חשבון WordPress.com שלך. לצאת מהמערכת /  לשנות )

תמונת גוגל פלוס

אתה מגיב באמצעות חשבון Google+ שלך. לצאת מהמערכת /  לשנות )

תמונת Twitter

אתה מגיב באמצעות חשבון Twitter שלך. לצאת מהמערכת /  לשנות )

תמונת Facebook

אתה מגיב באמצעות חשבון Facebook שלך. לצאת מהמערכת /  לשנות )

מתחבר ל-%s