"Isuzu" appears on 1/3000 warships!

Introduction of November new products.

Have you experienced 1/3000 scale already?!  What?

Not yet.

Try experiencing thinking that it was deceived oncenote

 

I knew that this series, snap-fit! What?

Even though it is so small. Because it is this.

 

One ship about 5 cm . The part is about 3 mm .

Yes, a little.

Because it is small, paint is scratched with brush painting.

Is Parit a hand ride or a finger ride good!? cute.

 

muscleI will not take up space. Even if 12 battleships are collected, it fits in A5 size ~! !

muscleThere is no need for adhesive, so it is not odorous.

muscleIt is easy to assemble because it is summarized to the minimum number of parts.

 

From that 1/3000 warship series, two new products appeared in November.

We will introduce "Guadalcanal Island Gunshot Volunteer Set".

 

A heavily cruising Aoba fleet led by Major Goto Fujita in the battle of Sabo island, including a newly designed light cruise "Isuzu"

The battleship Kaneguma and the Haruna fleet that succeeded in Gashima shelling are reproduced together! 
□ The product is a battle of the Sabo island off the coast of October 11,

Participating vessels involved in the Gajima bombardment strategy executed on the 13th were reproduced on 1/3000 scale.

 

Gajima Battle Fleet is a gun shot main battle ship Kanaga · Haruna

It consists of a total of twelve vessels including a lightning squadron including a guard band 's light cruiser Suzu.

 

Reproduction of the Naval Battle of Sabo Island The fleet consists of 5 ships of the 6th Squadron centering on Aoba

 

Light emission signal! " Walle · Aoba! Walle · Aoba! "

(You can also reproduce this figure)
□ Light Cruiser Nagara type "Isuzu" is a new design and will be commercialized this time.

 

 

□ Colorized shipboard machine is included. 
 As for the aircraft carrier Hayataka who carried out the sky direct shoulder during the operation period, 6 machines are included.

 

This aircraft is truly small grains of rice .

I'm doing my best and designing the Hinomaru and the canopy.

I would like you to look at the magnifying glass!

Ha __ kilpe.

 

November 15 shipping schedule!

looking forward to!

Dear Friends here the Italeri news just released

T34/85 Zavod 183 Mod. 44 1:35 scale (6545)
Iveco Turbostar 190-42 Canvas whit elevator 1:24 scale (3939)
Fiat 131 Abarth Rally 1:24 scale (3662)
Renault 5 Alpine 1:24 scale (3651)
"Top Gun" F-14A vs A-4F 1:72 scale (1422)
F-5E Swiss Air Force 1:72 scale (1420)
Operation Silver Bayonet – Vietnam War 1965 – Battle Set 1:72 scale (6184)
Gladiators 1:72 scale (6062)
Leonardo Da Vinci – Leverage Crane (3112)
Leonardo Da Vinci – Rolling Ball Timer (3113)

4 NEW KITS FROM AOSHIMA ON 1/24-Scheduled to be released in November 2018

1/24 Nissan S15 Silvia Spec. R '99

Aoshima's representative car model series

  • New decal
  • Spec R / Spec S selection formula
  • Specs R Pure aluminum wheel
  • Pure Full Aero
  • Muffler selection formula
  • Window frame masking seal included
  • Expedia tire use

* The image that is published is a prototype.


1/24 Toyota JZX 100 Mark II Tourer V '00

Aoshima's representative car model series

  • New decal
  • Front half spoiler
  • Eye line garnish
  • Aero mirror
  • 5 MT / AT selection formula
  • Window frame masking seal included
  • 16 inch dB tire used

* The image that is published is a prototype.


1/24 Nissan ER 34 Skyline 25 GT TURBO '01

Direct blood straight from the line 6, Ska G, commemorating the 20th anniversary of birth !!!

In the early 20 years since the advent of 1998, in response to customer requests, the 4-door sedan of the ER 34 Skyline will be commercialized in a completely new mold. I scaled down to the proportion patchy by 3D scan of the real car. We are considering the ease of making efficient parts splitting with the long-awaited catalog specification, a normal car's plastic model.

  • Full new ER34 Skyline set complete
  • Sunroof visor included
  • Pure aluminum wheel
  • Rear wing genuine or option selection formula
  • Encapsulated with genuine mudguard
  • Using Advan dB tire

* The image that is published is a prototype.


1/24 Nissan ER 34 Skyline 25 GT TURBO '01 custom wheel

 

Direct blood straight from the line 6, Ska G, commemorating the 20th anniversary of birth !!!

In the early 20 years since the advent of 1998, in response to customer requests, the 4-door sedan of the ER 34 Skyline will be commercialized in a completely new mold. I scaled down to the proportion patchy by 3D scan of the real car. We are considering the ease of making efficient parts splitting with the long-awaited catalog specification, a normal car's plastic model.

  • Full new ER34 Skyline set complete
  • Door visor included
  • Genuine side · rear under spoiler
  • Raise TE 37 aluminum wheel

* The image that is published is a prototype.


 

NEW FROM meng-model The Ultimate Leopard 1 Variant

 

Canada started to upgrade their Leopard C1 tanks to the Leopard C2 standard since the year 2000. The main upgrade was to fit the Leopard 1A5 turrets bought from the German Federal Ministry of Defence on the original Leopard C1 chassis. Other improvements included the installation of a thermal imager and the EMES 18 fire-control system. In 2006, the upgraded Leopard C2 tanks which were equipped with the MEXAS appliqué modular armor system joined the International Security Assistance Force in Afghanistan. The concept of this armor system was quite advanced when it appeared in the 1990s. Its composite armor can protect against kinetic energy and chemical energy penetrators.
This MENG TS-041 Canadian Main Battle Tank Leopard C2 MEXAS w/Dozer Blade plastic model kit has a total of 500 parts. The finished model will be 270.2mm and 86.5mm high. This kit includes movable suspension, one-piece TPE tracks, clear light and periscope parts, and fine PE parts. The dozer blade is liftable and lowerable. Details under add-on armor are completely replicated.
During the development of this kit, we have received a lot of reference materials from the Canadian military specialist Mr. Anthony Sewards. He also took part in reviewing the kit design. Anthony Sewards served with the Canadian Military for over 26 years. Serving with the Lord Strathcona’s Horse (Royal Canadians). Anthony has served on 7 operational tours in the Middle East, Bosnia and multiple combat tours in Afghanistan commanding Leopard Tanks on combat operations. Now retired and has authored photo assistant books on Canadian Leopard tanks and the Canadian Leopard Project DVD reference series on the Canadian Leopard tanks in service, and is an international consultant to model companies. With his help, this MENG product has become better and more accurate.

 

NEW FROM HOBBYBOSS BUNDESWEHR LEOPARD1 A5

45404975_1121563684668890_7476200605225058304_n

Leopard 1A5

In 1980, a research program was undertaken to study further improvements to the Leopard 1, providing it with a completely modern fire control system and fully effective night/bad-weather vision system. The decision was made to base the upgrades on the earlier models, which were no longer competitive.

The resulting Leopard 1A5 was based on 1,225 vehicles of the Leopard 1A1A1 model. The turrets were again modified for the 1A5, both in order to store all of the new equipment, as well as to move more of the ammunition into the rear of the turret, as opposed to the left side of the driver where it had previously been stored. The new turret was also able to mount the newer 120 mm gun from the Leopard 2 if desired, although this option has not been used.

After trials, the Krupp-Atlas Elektronik EMES 18 fire control system, which was developed from the EMES 15 used on the Leopard 2, was selected in December 1983. The EMES 18 included two new sights on the top of the turret, and no longer required the "bumps" as did the earlier optical systems. A crucial part of the upgrade was the introduction of more effective ammunition, including new APFSDS rounds.

The Leopard tank could also be fitted with bolt-on lexan armour panels, which have increased the effectiveness of the armour. These "modified" tanks have proved themselves in the field.

The first modified vehicle was delivered in early 1987. Since then, almost all users of the Leopard 1 have also applied similar changes to their own vehicles, and in most ways the 1A5 can be considered the "standard" Leopard 1 today.

NEW KIT IN PROGRESS-TOP ARMOURED RECOVERY VEHICLE 37038 1/35 FULL KIT

Description

Scale: 1:35

Barcode: 4820183312006

Series: Military Miniatures

Box size: 386x240x70 cm

HIGHLY DETAILED MODEL
ALL HATCHES CAN BE POSED OPEN OR CLOSED
SEPARATED OMSh TRACKS
PHOTO-ETCHED PARTS INCLUDED
CLEAR PARTS INCLUDED
DECALS SHEET FOR 3 VARIANTS


Content box

PE parts

decals

 

***plastic parts***

 

Clear Parts


3D renders


Marking/Side views


instructions