Produce Blog Shaman Let's put on resin 1 part.
Although it is a resin part of Value Gear Inc. which is included in our kit,
Is resin hard? Is not it difficult to paint? The uneasy voice is also a thriller.
If you actually try using it, the charm of the tank will be more up so it will be more up,
Easy, but we will introduce the painting process and how to load on tanks.
① At first the burrs and edges that are attached to the bottom side of the opened parts are made with a design knife
I will remove it. In order not to wrap the edge more than necessary unexpectedly,
Let's process the luggage bag so that it does not turn into strange edges.
② Put on a tank and check!
The picture is jumbo. Four jerry in the rear luggage rack.
I put a wooden box etc on the side. On the rear of the engine hatch, you will have a main big luggage.
Depending on the type of car, the on-board tool is fixed on the hatch or the like, and if placed as it is
Luggage will float. In this example we removed the wrenches.
I want to make it feel good.
③ If you can roughly image, spray the surfacer.
Especially washing the surface oil etc with detergent is not done. Safu will ride enough as it is.
Worrisome one should wash with mild detergent. Please dry thoroughly then.
This time I blew the white surfacer with an airbrush.
④ Next, I blew the brown line to the shadowed part.
Creos' mahogany is blowing.
⑤ Once dried, you can spray Sandy Brown on wooden boxes.
I blow it thinly and paint it to make use of the underlying brown.
⑥ I will spray other bags with khaki color.
Thanks to the underlying brown, you will see a three-dimensional effect.
I think that the color of bags is your choice.
After this, if you add dust stains, the look will also change.
Please paint as you like, including other modelers' finished products, actual car photos etc.