Read this if you want to know the ship NEXT Tama! !

I introduced it on Twitter the other day

Magic crownFrom assembly of Tama's test shot

Magic crownWhat is the ship NEXT?

Magic crownWhat is the year of the motif?

Magic crownI want to do everything in detail

Please see to the endGoodWink

Then ~Koala


Magic crownShip NEXT Series Under development with new mold Light cruiser_Kuma 

Test shot in the assembly finished product to make tried.


 ↓ There are still various shapes and shapes, but please enjoy the atmosphere with high-quality photos.

 The 1st to 4th guns are equipped with a wave shield. The chrysanthemum crest is an integral mold on the bow

You can understand well the smart shape to demonstrate the high speed like the flagship of the torpedo squadron.



Tama is a familiar horizontal stretch against the linoleum vertical stretch of Kuma. ↓ Tama and Kuma have their own decks!


Please look up the surface modeling on the heel side!

High-strength steel, rivet, closed porthole in the center … 

This is 1/700 instead of 1/350.


Scheduled to be released from February to March 2020. looking forward to!



Magic crown What is ship NEXT Glitter?

The product is designed with a snap-fit ​​type that does not require an adhesive, and is a series that sets it apart from conventional kits.

The assembly method is all inset, and both offshore and full hull types can be manufactured by dividing the parts in the water line (excluding bonus parts)

Color tone is expressed in advance using pre-colored molding materials, and details and markings are reproduced with a real seal with excellent followability.

★ bow

Accurately shaped the delicate curve near the bow fairleader. The design reflects the 66cm shear (height) at the bow.

Detailed reproduction of steel plate / strip processing surface differences on the chain deck.

The Ogai Electric Circuit is expressed with an appropriate height and sharpness that models the electric circuit and the holding bracket.


★ main gun
The 14-centimeter main gun is shaped including the breech (within the shield), a slide mold is used, and the muzzle represents an opening.
Only the 1st to 4th guns are shaped with a shield on the shield, and the difference from the 5th to 6th guns is used as a special part to express the difference.
The 2nd main gun contains two types of parts facing backwards, and facing forward, with a gun elevation angle to prevent waves.
On the top of the main gun shield, a bonded 13 mm single machine gun is attached as a bonus part.


★ Funabashi
The bridge is recreated based on the remaining drawings and recorded photographs.
The bulletproof board covering the Rashinkan Bridge is expressed in detail by examining its shape, rivets and mounting angle.
The sponson on the side of the bridge is designed to recreate the shape including the lower strut, increasing the sense of precision.
The bridge window is made of transparent parts, and the interior floor is engraved with a grating floor and the compass is also three-dimensional.
The compass and the rear part of the command tower are shaped as a canvas.


★ Torpedo Armor
The launch tube is a completely new design with an excellent finish that incorporates detailed shapes.
The opening of the rear launch tube comes with special parts that can reproduce the state of being blocked by canvas.


★ Central part
Many armor plate thicknesses and three-dimensional shapes of rivets are reflected, centering on the central part of the heel side.
The upper part of the chimney is in a state of “feeling out” and black molding color. The chimney is a thin type of the Kuma type and reproduced with dedicated parts.
The steam pipe has been made highly precise by making it a separate part from the chimney, and the taller size than the chimney has also been faithfully reproduced.
The davit in front of the port side reproduces the appearance of a large replacement.
The 5,500t type light cruiser has two types of linoleum deck, vertical / horizontal, and Tama is reproduced with special parts on the horizontal.


★ rear / stern
The rear shelter deck is designed and divided with the warship color on the deck edge / side and the linoleum color on the horizontal plane at precise positions.
The linoleum tension is also reproduced under the rear shelter deck.
The rear mast is an integrally molded part including the rear signal light.
Includes a guff that attaches to the rear mast so that the battle flag can be raised as a bonus part.
The tip of the stern detonation rail is in a folded state, and its appearance is expressed in an accurate shape without omission.
The double horn shape of the stern is accurately represented on the bottom part of the ship.



Comes with a cut-out sticker to express the color of details.
Includes the warship flag and the internal color of the cutter.
A black molded product with a low center of gravity is included.
Magic crownFinished size: approx. 32 x 2.3 x 5.5 cm = length 32.3 x ship width 2.3 x height 5.5 cm




Did you know Fujimi's NEXT Tama?

Released in February! ! Retail stores are accepting highly acclaimed reservations! !

Reservation required to get securelyLOLheart

להשאיר תגובה

היכנס באמצעות אחת השיטות האלה כדי לפרסם את התגובה שלך:

הלוגו של

אתה מגיב באמצעות חשבון שלך. לצאת מהמערכת /  לשנות )

תמונת גוגל

אתה מגיב באמצעות חשבון Google שלך. לצאת מהמערכת /  לשנות )

תמונת Twitter

אתה מגיב באמצעות חשבון Twitter שלך. לצאת מהמערכת /  לשנות )

תמונת Facebook

אתה מגיב באמצעות חשבון Facebook שלך. לצאת מהמערכת /  לשנות )

מתחבר ל-%s