NEW FROM HOBBYBOSS 1/35 PLA 59 Medium Tank-early 84539

 

Product introduction:
Item No 84539
Item Name PLA 59 Medium Tank-early
Bar Code 6939319245397
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 257.3mm Width: 93.4mm
Total Plastic Parts 520+
Total Sprues 15 sprues , lower hull , upper hull and turret
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts copper cable
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2019-09
More Features the kit consists of over 520 parts
– Two-directional slide moulded lower hull & turret
– 192 individual tracks links
– photo-etched parts included

NEW FROM HOBBYBOSS 1/48 MiG-31BM. w/KH-47M2 81770

 

Product introduction:
KH-47M2,It is the first and only air-based hypersonic air-launched ballistic missile in the world.

The appearance is very similar to the appearance of the Russian main military tactical missile “Iskander-M” . The fuselage / wing integrated design is adopted. The projectile is cylindrical and has no obvious intake port, and the tail has obvious “ten” shaped small pneumatic tail. It weighs about 5 tons, with a length of about 7 to 8 meters, a diameter of about 2 meters, and a wingspan of less than 0.5 meters. The head of the missile has a slender double cone streamline shape, and the engine compartment of the central engine shows an obvious crown. The maximum speed is up to 10 Maher. At the same time, both the ballistic missile and cruise missile’s functional characteristics can carry various high equivalent warheads. It is called “the most difficult missile to intercept in the world”.

It is currently carried by the MIG -31BM.
Item No 81770
Item Name MiG-31BM. w/KH-47M2
Bar Code 6939319217707
Scale 1:48
Item Type Plastic Model Aircraft Kit
Model Dimension Length: 479.6mm Wingspan: 280.3mm
Total Plastic Parts 300+
Total Sprues 17 sprues , fuselage and tires
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts undercarriage
Photo Etched Parts 2 pcs
Film Accessory n/a
Released Date 2019-10
More Features the kit consists of over 300 parts
-Detailed fuselage&wing w/accurate design
-Detailed cockpit
-metal undercarriage
-rubber tires
-photo etched parts included

NEW FROM HOBBYBOSS 1/72 German KARL-Geraet 040/041 on Railway Transport Carrier 82961

 

Product introduction:
Item No 82961
Item Name German KARL-Geraet 040/041 on Railway Transport Carrier
Bar Code 6939319229618
Scale 1:72
Item Type Plastic Model Armor Kit
Model Dimension Length: 590mm Width: 80mm
Total Plastic Parts 430+
Total Sprues 15 sprues , lower hull and tracks
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts metal shaft , spring
Photo Etched Parts n/a
Released Date 2019-10
More Features The kit consists of over 430 parts with 4 section
roadbeds
– railway track in 500mm length

 

NEW FROM HOBBYBOSS 1/35 IDF PUMA AEV 84546

 


Product introduction:
The Puma is a heavily armored Combat engineering vehicle and armored personnel carrier that the Engineering Corps of the Israeli Defence

Forces has used since the early 1990s. The vehicle can carry a crew of up to eight. The 50-ton vehicle’s speed is 45 kilometers an hour.

The Puma uses the hull of the Sho’t, which is itself a modified British Centurion tank.

Some Pumas are equipped with the Carpet mine-clearing system. This consists of 20 rockets that the crew can fire singly or all together. The rockets contain a fuel-air explosive warhead which spreads a cloud of fuel fumes that are then detonated. The overpressure from the explosion destroys most mines. The Puma then advances behind a set of rollers that trigger any mines the fuel-air explosion did not destroy. There is also electronic equipment for detonating roadside bombs or jamming detonation signals.

The Puma is capable of towing a mobile bridge for deploying over trenches and enemy land obstacles during battle. Unlike the M60 AVLB launching the bridge, the Puma pulls the bridge during combat and pushes the bridge over the obstacle, allowing tanks and infantry personnel carriers to maneuver quickly in the battlefield.

Armament consists of three 7.62 mm FN MAG machine guns, including one in a remote turret that the crew can control from within the cabin by a Rafael Overhead Weapon Station (OWS). The vehicle also has a 60mm mortar and two launchers for smoke grenades.
Item No 84546
Item Name IDF PUMA AEV
Bar Code 6939319245465
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 343.6mm Width: 133.2mm
Total Plastic Parts 1200+
Total Sprues 32 sprues , upper hull and lower hull
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts copper cable , copper chain
Photo Etched Parts 2 pcs
Film Accessory n/a
Released Date 2019-10
More Features the kit consists of over 1200 parts
– Two-directional slide moulded lower hull
– individual tracks links
– photo-etched parts included

NEW KIT FROM trumpeter 1/700 Chinese Navy Type 071 Dock Landing Ship 06726

product description:
The Type 071 amphibious dock landing ship has a very good overall stealth capability. The exterior lines of the ship are simple and capable, and the lower part of the hull is outwardly inclined and the upper part is inclined inwardly. Other large surface battleships developed by China in recent years are very consistent in their focus on stealth considerations. The hull is a high freeboard flat deck type with relatively small length and width and a full hull. It uses a large flying shear bow and a wedge-shaped stern. Airworthiness is outstanding.

The main weapons of this class of ships are: the bow is equipped with a single-tube 76 mm new caliber naval gun. The center and rear of the ship’s superstructure are equipped with four Russian-made AK630 short-range artillery systems. The fire control system can provide manned and unmanned modes. It is mainly used for air-to-sea defense, including interception. Fight sea-sweeping anti-ship missiles, enemy low-altitude assault helicopters, small maritime targets, light armored coastal targets, floating mines, and more. This class of ship is also equipped with short-range infrared and metal foil jamming devices common to Chinese surface ships on both sides of its superstructure, which can interfere with enemy incoming missiles from a certain distance in the sea and deviate from its preset trajectory.

The first ship, No. 998, started construction in Shanghai in June 2006 and was launched on December 21 of the same year. A sea trial was conducted in September 2007. Joined the South China Sea Fleet in December 2007.

Product ID 06726
product name Chinese Navy Type 071 Dock Landing Ship
Bar code 9580208067261
Product ratio 1: 700
product type Plastic Model Warship Kit
Model size Length: 300mm Beam: 40mm
Total number of parts 140+
Metal parts n / a
Etched parts 1 piece
Film n / a
Resin parts n / a
Total offset 11 sprues and stand
Publication date 2019-12
More description -hull split into two parts
-Deck wood pattern finely rendered -Contains
display stand and engraved name plate
-Photo-Etched parts included


 

NEW KIT FROM trumpeter 1/144 British “Vulcan” strategic bomber 03931

product description:
Aphrodite’s “Vulcan” jet-less delta-wing strategic bomber served in the British Royal from 1956 to 1984.

The “Vulcan” B.1 was first delivered to the Royal Air Force in 1956; in 1960, it was equipped with an improved “Vulcan” B.2. The improved “Vulcan” B.2 engine had greater thrust and wing area. Increased and improved electrical and electronic countermeasure systems; most were improved to carry and launch “Blue Steel” missiles. As part of the nuclear deterrent force, Vulcan was the mainstay of British air-launched nuclear counterattack forces during the Cold War. Although Vulcan is a typical nuclear weapon carrier, it can also perform traditional bombing missions.

Product ID 03931
product name British “Vulcan” strategic bomber
Bar code 9580208039312
Product ratio 1: 144
product type Plastic Model Aircraft Kit
Model size Length: 225mm Wingspan: 235mm
Total number of parts 60+
Metal parts n / a
Etched parts n / a
Film n / a
Resin parts n / a
Total offset 4 sprues
Publication date 2019-12
More description The kit consists of over 60 parts, 2 clear parts
-fuselage & wing with finely engraved panel lines

 

NEW KIT FROM trumpeter 1/350 USS New York Dock Landing Ship (LPD-21) 05616

product description:
The New York amphibious transport dock ship is an amphibious transport dock ship belonging to the U.S. Navy. It is the fifth ship of the San Antonio class. The warship in service. It was officially commissioned on December 7, 2009. The ship is most famous for its hull, which has about 7.5 tons of steel. It is a World Trade Center building that was recovered from the 9/11 crash. It was mainly used to make the bow.

The hull of the New York and other sister ships of the same class is very different from the streamlined appearance of traditional amphibious warships. Its functions are mainly as anchoring and landing platforms for two important combat equipment airborne landing crafts (LCAC) and MV-22B 垂直 vertical take-off and landing aircraft of the Marine Corps.

Product ID 05616
product name USS New York Dock Landing Ship (LPD-21)
Bar code 9580208056166
Product ratio 1: 350
product type Plastic Model Warship Kit
Water painting USS New York (LPD-21)
Model size Length: 595.7mm Beam: 91mm
Total number of parts 760+
Metal parts chain
Etched parts 3 pcs
Film n / a
Resin parts n / a
Total offset 29 sprues, hull, deck and stand
Publication date 2019-12
More description -The Hull is a one piece part with exception of the bulbous nose
-Detailed Flight Deck, Hanger Deck and Well Deck:
-US Marine Assault Vehicles:
AAV-7 × 2
LCAC Hovercraft × 2 and LCU Landing Craft × 1
-Aircraft and Helicopters :
CH-46E

NEW KIT FROM trumpeter 1/100 Beijing Siheyuan-tube roof 09001


product description:
Product ID 09001
product name Beijing Siheyuan-tube tile
Bar code 9580208090016
Product ratio 1: 100
product type Plastic Building Model Kit
Model size Length: 336mm Width: 196mm
Total number of parts 200+
Metal parts n / a
Etched parts n / a
Film n / a
Resin parts n / a
Total offset 12 sprues and base
Publication date 2019-12
More description The kit consists of over 200 parts