trumpeter new kits for 08/05/2018

Soviet 2A3 Self-propelled Howitzer 09529

product description:
2A3 kondensator 2P is a 406-mm self-propelled howitzer produced by the former Soviet Union. 2A3 was the product of the Cold War period. The United States announced new tactical regulations for the “Army Division” to develop and produce tactical nuclear weapons capable of launching nuclear shells for future nuclear wars. The United States developed and produced the M65 cannon in 1952 and was deployed in Germany in 1953. The Soviet Union also began to develop a targeted 406MM self-propelled howitzer capable of launching nuclear shells, codenamed "271 Project."

The Grabin Design Bureau is responsible for the development of the artillery system and completed it in 1955. The body part codenamed "271 Project" was completed by the Korinlin Design Bureau of Leningrad. The final assembly was completed by the Leningradok plant and it was not until 1956 that the installation tests were completed. The total output is only four vehicles.

Western observers only saw this new weapon for the first time in a Red Square military parade in 1957. It was also initially determined that this weapon was only used as a model for deterrence.

Product number 09529
product name Soviet 2A3 Self-propelled Howitzer
Bar code 9580208095295
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 430.6mm Width: 96.8mm
Total number of parts 830+
Metal parts Copper cable
Etching components 1 piece
Film film n/a
Resin parts n/a
Total number of offsets 24 sprues and lower hull
Announcement date 2018-04
More description The kit consists of over 830 parts
>the kit w/refined detail
>multi-slide moulded lower hull
>plastic tracks w/fine detail

ART BOX

full box

decals

Marking

page from the kit Assembly booklet


Russia's BMPT fire support tank "Ataka" 09565

product description:
The BMPT heavy infantry fighting vehicle is an armored vehicle developed by the Russian Federation to support tanks and infantry operations, especially in urban operations. Because of its powerful firepower, it is nicknamed the "Terminator."

The BMPT design is based on the heavily used T-72 main battle tank chassis of the Russian army. Compared to the T-72 tank, the rear position of the BMPT cockpit has been increased, providing more space for installation. The BMPT turret is equipped with two doors of the Type 2A42. 30 mm cannon, equipped with 850 rounds. This two-way artillery can use HE-T, APDS, HE-FRAG, and AP-T, and 200 to 300 The low rate of fire/minute or 600 rounds/minute is adjustable. There is a PKTM (modified PKT Coupling Machine Gun) 7.62mm machine gun above the cannon. Both sides of the turret are equipped with two sets of 9M120 "Assault-T" anti-tank missiles (NATO codename AT-9 "Helix-2") launchers on the left and right, equipped with HEAT warheads that can penetrate any armor (including Reactive armor) and other goals.

Product number 09565
product name Russian BMPT fire support tank "Ataka"
Bar code 9580208095653
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 207mm Width: 117mm
Total number of parts 1100+
Metal parts Copper cable
Etching components 3 pcs
Film film n/a
Resin parts n/a
Total number of offsets 25 sprues , upper hull and lower hull
Announcement date 2018-04
More description The kit consists of over 1100 parts
>the kit w/refined detail
>multi-slide moulded upper and lower hull
>188 individual tracks links
>Etched Photo parts included

ART BOX

FULL BOX

decals

Marking

page from the kit Assembly booklet


***plastic parts***

PE parts


Soviet 2S14 "Zaro-S" 85mm anti-tank gun 09536

product description:
2S14 The Zaros-S was developed in the late 1970s. Its design requirements were to provide the supporting firepower for the BTR-60 and BTR-70, and to have the firepower to engage the enemy's tanks. To achieve this design intent, former Soviet engineers installed an 85-mm antitank gun on the chassis of the BTR-70.

The weapon had the ability to destroy NATO's small-calibre main battle tanks at that time, but the protection of the BTR-70's chassis was too low to withstand the other's anti-tank weapon attacks. The model of the Zhalo-S cannon was 2A62. An improved version of the D44 anti-tank gun during World War II.

Product number 09536
product name Soviet 2S14 "Zaro-S" 85mm anti-tank gun
Bar code 9580208095363
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 215.5mm Width: 80.7mm
Total number of parts 460+
Metal parts Copper tube
Etching components 2 pcs
Film film n/a
Resin parts n/a
Announcement date 2018-04
More description The kit consists of over 460 parts
>the kit w/refined detail
>multi-slide moulded upper hull and lower hull
>rubber tires
>photo etched parts included

ART BOX

FULL BOX

decals

Marking

page from the kit Assembly booklet


***plastic parts***

PE parts


US Navy Texas Battleship BB-35 06712

product description:
The Texas Ship (BB-35) is the second ship of the New York-class battleship and the second ship of the United States Navy named after the State of Texas. She served the United States Navy for 34 years and became a living witness to the war years. She participated in the Tampico incident in Mexico in 1914, served as an escort for ships of the Allies in World War I, was more active in the Atlantic Ocean in North Africa, participated in the landing in Normandy, and then moved to the Pacific to assist the Allied forces in landing on Iwo Jima and Okinawa. World War II won 5 battle stars. After the decommissioning, the Texas was converted into a floating museum in Houston.

The reason why the Texas No. 1 is famous is its historical record. She is not only the oldest fearless ship in the United States, but also one of the few existing ships in the world who served two wars.

As far as the United States is concerned, the USS Texas was the first US battleship equipped with air defense anti-aircraft guns and modern fire control systems, catapulted military reconnaissance planes, the use of CXZ radar signals, and the installation of a CXAM-1 radar, and was permanently converted into a museum ship. And was rated as a national historical landmark in the United States.

Product number 06712
product name US Navy Texas Battleship BB-35
Bar code 9580208067124
Product ratio 1:700
product type Plastic Model Warship Kit
Model size Length: 246.5mm Beam: 49.8mm
Total number of parts 480
Metal parts N/A
Etching components 1 PIECE
Film film n/a
Resin parts n/a
Total number of offsets 9 sprues and deck
Announcement date 2018-04
More description -hull split into two parts
-Deck wood pattern finely rendered -Contains
display stand and engraved name plate
-Photo-Etched parts included

ART BOX

FULL BOX

decals

Marking

page from the kit Assembly booklet


***plastic parts***

PE parts


China Strong-5 B Torpedo Attack Machine 01684

product description:
Strong-5 is based on China's J-6/MiG-19 fighter and is based on the design style of Western attack aircraft. In 1966, the Strong-5 aircraft went into mass production and began to equip its troops to become the main type of the Chinese Air Force.

The initial design of the strong type-5 used two 30mm guns mounted on both sides of the nose and later replaced two 23mm cannons at the root of the two wings. The fuselage has a length of about 4 meters in the fuselage's internal weapons compartment, can be mounted on two 250 or 500 kilograms of aviation bombs. Two weapon bays under the belly can also hold 250 or 500 kg bombs. There are two hanging beams under the wing. Some aircraft can be modified to mount a 0.5-2 million-ton nuclear bomb.

Subsequent improvements to upgrades eventually made it a huge family. Roughly as follows: basic type; strong-5 A; strong-5 B; strong-5I; strong-5IA; strong-5II; strong-5III; strong-5M; strong-5K; strong-5C; strong-5D; strong- 5E; strong -5F; strong -5G; strong -5J; strong -5KJL;

Tens of thousands of aircraft have been produced since the strong 5s were put into production. In addition to the Chinese air and navy, they have also been exported to North Korea, Pakistan and other countries.

Product number 01684
product name China Strong-5 B torpedo attack aircraft
Bar code 9580208016849
Product ratio 1:72
product type Plastic Model Aircraft Kit
Model size Length: 227.2mm Wingspan: 135.5mm
Total number of parts 90+
Metal parts n/a
Etching components 1 piece
Film film n/a
Resin parts n/a
Total number of offsets 7 sprues
Announcement date 2018-04
More description The kit consists of over 90 parts , clear parts for canopy
– fuselage&wing with finely engraved panel lines

ART BOX

FULL BOX

decals

Marking

page from the kit Assembly booklet


***plastic parts***

PE parts


Russian T-62 Medium Tank 1972 Type 07147

product description:
As a follow-up to the T-55, the T-62 is retrofitted with a new 2A20 115 mm sliding gun. Both use the same load-bearing wheels, tracks, engines, gearboxes, and externally-grouped fuel tanks and many other common parts. The main difference is that the T-62 has redesigned the new turret to increase the turret's seat ring, thus lengthening the chassis. The tail-stabilized shelled armor-piercing projectile that it launched penetrated a 300-mm-thick homogenous steel 1000m away. At that time, it was sufficient to deal with NATO countries such as the United States M-48, and later the British "Chief" and other tanks. Initially, the T-62 was only an emergency design for the emergency improvement of the T-55 strike capability against NATO's new tanks. Unexpectedly, the reliable performance and low cost make it as large as the T-54/55, and it is equipped with the Red Army for a long time. The troops became the main chariot.

Despite the appearance in the 1960s, the Soviet Union continued to improve the T-62 and developed the famous T-72 main battle tank on the basis of it. Today, it is still possible to see the T-62's military service in many countries. The Arab countries including Egypt, Iraq, and Syria use the most concentration. Israel had seized a large number of T-62s during the Middle East War and was put into use after being converted in accordance with the IDF standards.

Product number 07147
product name Russian T-62 medium tank 1972 model
Bar code 9580208071473
Product ratio 1:72
product type Plastic Model Armor Kit
Model size Length: 139mm Width: 48.6mm
Total number of parts 60+
Metal parts N/A
Etching components N/A
Film film N/A
Resin parts N/A
Total number of offsets 3 sprues , upper hull , lower hull and tracks
Announcement date 2018-04
More description The kit consists of over 60 parts

ART BOX

FULL BOX

decals

Marking


***plastic parts***