NEW FROM hobbyboss 1/35 German 12.8cm FLAK 40 84545

Product introduction:
Item No 84545
Item Name German 12.8cm FLAK 40
Bar Code 6939319245458
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 353.3mm Width: 90.4mm
Total Plastic Parts 370+
Total Sprues 13 sprues and tires
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts brass wire
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2019-08
More Features The kit consists of over 370 parts
– Details finely represented by newly tooled parts
– Rubber tires
– Photo Etched parts included

 

NEW FROM hobbyboss Russian Yak-28PP Brewer-E 81768 1/48

Product introduction:
The Yak-28P became the dedicated long-range, missile-armed interceptor which could be called upon, in relatively short order, to take on marauding Western bombers or spy planes. The type was born in 1960 and entered service as soon as 1964. These versions lacked the internal bomb bay of their tactical bomber brethren which allowed for more onboard fuel stores to be exercised. An interception radar was standard and fitted in the nose cone assembly while integrated with the aircraft's missile-only payload. Production resulted in 435 aircraft.

The Yak-28P was powered by 2 x Tumansky R-11 series afterburning turbojet engines delivering 10,140lbs on dry thrust and 13,670lbs with afterburning engaged. Maximum speed was 1,140 miles per hour with a range out to 1,550 miles and a service ceiling of 55,000 feet. Armament was generally 2 x R-98M (AA-3 "Anab") medium-ranged, air-to-air missiles and 2 x K-13A (AA-2 "Atoll") short-ranged air-to-air missiles. The aircraft carried a mix of R-98M missiles, typically an infrared homing and a semi-active radar homing version. No internal cannon was fitted.
Item No 81768
Item Name Russian Yak-28PP Brewer-E
Bar Code 6939319217684
Scale 1:48
Item Type Plastic Model Aircraft Kit
Model Dimension Length: 396mm Wingspan: 285mm
Total Plastic Parts 150+
Total Sprues 11 sprues and nose cone
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts n/a
Film Accessory n/a
Released Date 2019-08
More Features the kit consists of over 150 parts
-Detailed fuselage&wing w/accurate design
-Detailed cockpit

NEW FROM hobbyboss 1/35 Leopard C1A1 (Canadian MBT) 84502

The Leopard (or Leopard 1) is a main battle tank designed and produced in West Germany that first entered service in 1965. Developed in an era when HEAT warheads were thought to make conventional heavy armour of limited value, the Leopard focused on firepower in the form of the German-built version of the British L7 105-mm gun, and improved cross-country performance that was unmatched by other designs of the era.

The design started as a collaborative project during the 1950s between West Germanyand France, and later joined by Italy,[1] but the partnership ended shortly after and the final design was ordered by the Bundeswehr, with full-scale production starting in 1965. In total, 6,485 Leopard tanks have been built, of which 4,744 were battle tanks and 1,741 were utility and anti-aircraft variants, not including 80 prototypes and pre-series vehicles.
Item No 84502
Item Name Leopard C1A1 (Canadian MBT)
Bar Code 6939319245021
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 273.3mm Width: 106.1mm
Total Plastic Parts 630+
Total Sprues 14 sprues , upper hull , lower hull and turret
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts copper cable
Photo Etched Parts 3 piece
Film Accessory n/a
Released Date 2019-07
More Features the kit consists of over 630 parts
– Two-directional slide moulded lower hull & turret
– 160 individual tracks links
– photo-etched parts included

 

NEW FROM hobbyboss 1/144 Chinese KJ-200 83903

KJ-200( Chinese military codename: K/J E03) is an improved type of Y -8AEW. Initially, the machine was named "balanced wood AEW". Is China's equipped with the "balance beam" airborne active phased array radar early warning aircraft. The machine uses the -9 body as the carrier, and its main equipment for the manufacture of china. In January 14, 2005, the first test flight was completed.

KJ-200's carrier platform for the transport of -8 series III class platform / hi tech third kinds of carrier. WJ-6C facelift, power increased to 5100 hp. The wing increases the overall fuel tank, and the carrier oil is restored to the level of An-12 by Y-8C. Replacement of the overall avionics system. Its main role is a air patrols, to make up ground radar network of low altitude detection blind area, and rugged rough command to guide the task can be automatically or manually and KJ-2000 AWACS for information exchange and sharing. And the formation of KJ-2000 type of early warning, offensive and defensive, the main auxiliary collocation configuration.

KJ – 200 is from development to production are all by our independent development and production of aircraft, it on the one hand, for our country in early warning aircraft on a blank, on the other hand also break a few Western countries and of our early warning aircraft technology blockade.
Item No 83903
Item Name Chinese KJ-200
Bar Code 6939319239037
Scale 1:144
Item Type Plastic Model Aircraft Kit
Model Dimension Length: 239.1mm Wingspan: 264.4mm
Total Plastic Parts 120+
Total Sprues 7 sprues
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2019-07
More Features The kit consists of over 120 parts ,12 clear parts
– fuselage&wing with finely engraved panel lines

 

NEW FROM hobbybos-1/72 German Kanonen und Flakwagen of BP42 82925

Product introduction:
For the armored train units of Type BP42, the artillery was increased, following Russian and Polish examples, to four guns, which were not, though ,mounted two to a car as in the latter types, but one per separately built ten-sided rotating turret, in order to avoid too-great losses from a direct hit. The two halves of the train, before and behind the locomotive were identical and consisted of one artillery car with one 10cm le.F.H 14/19(p) gun, one command and infantry car and one artillery and anti-aircraft car with one 7.62cm F.K.295/l(r) and one 2cm anti-aircraft quadruple unit.

Item No 82925
Item Name German Kanonen und Flakwagen of BP42
Bar Code 6939319229250
Scale 1:72
Item Type Plastic Model Armor Kit
Model Dimension Length: 594.2mm Width: 81.7mm
Total Plastic Parts 110+
Total Sprues 4 sprues and hull
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts n/a
Film Accessory n/a
Released Date 2019-06
More Features The kit consists of over 110 parts with 4 section
roadbeds
-Newly tooled parts in accurate detail

NEW FROM hobbybos-1/35 Pz.Kpfw.VI Sd.Kfz.182 Tiger II (Henschel Feb-1945 Production) 84532

 

Product introduction:
In early October 1942, plans for production of the VK 45.03 were reviewed,Initially two designs were provided, one by Henschel and one by Porsche. Both used a turret design from Krupp; the main differences were in the hull design, transmission and suspension.

The Henschel version used a conventional hull design with sloped armor resembling the layout of the Panther tank. It had a rear mounted engine and used nine overlapping road wheels per side, mounted on transverse torsion bars, in a similar manner to the original Tiger. To simplify maintenance, however, the wheels were overlapping rather than interleaved as in the Tiger

Henschel won the contract, and all Tiger IIs were produced by the firm. Two turret designs were used in production vehicles. The initial design is sometimes misleadingly called the "Porsche turret" due to the belief that it was designed by Porsche for their prototype. In fact this turret was simply the initial Krupp design for both prototypes. This turret had a rounded front and steeply sloped sides, with a difficult-to-manufacture curved bulge on the turret's left side, to accommodate the commander's cupola. Fifty early turrets were mounted to Henschel's hull and used in action. The more common "production" turret, sometimes called the "Henschel" turret, was simplified with a flat face, no shot trap (created by the curved face of the initial-type turret), less-steeply sloped sides, and no bulge for the commander's cupola.

The track system used on the Tiger II chassis was a unique one, which used alternating "contact shoe" and "connector" links—the contact shoe link had a pair of transverse metal bars that contacted the ground, while the connector links had no contact with the ground.

The Tiger II was developed late in the war and made in relatively small numbers. Like all German tanks, it had a gasoline engine. However, this same engine powered the much lighter Panther and Tiger I tanks. The Tiger II was under-powered, like many other heavy tanks of World War II, and consumed a lot of fuel which was already in short supply.

Item No 84532
Item Name Pz.Kpfw.VI Sd.Kfz.182 Tiger II (Henschel Feb-1945 Production)
Bar Code 6939319245328
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 289.9mm Width: 107.3mm
Total Plastic Parts 570+
Total Sprues 24 sprues , lower hull , upper hull and turret
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2019-06
More Features The kit consists of over 570 parts
>the kit w/refined detail
>multi-slide moulded lower hull , turret
>individual tracks
>photo etched parts included